Connecting a USB device
(Except for South Africa and Argentina
models)
A USB cable (not supplied)
Note
You can use your iPhone/iPod with this receiver
via Bluetooth connection only.
5: Connecting the
antennas (aerials)
Before connecting the antennas (aerials),
be sure to disconnect the AC power cord
(mains lead).
A
USB device
* The shape of the connector varies depending on
Notes
• To prevent noise pickup, keep the AM loop
• Be sure to fully extend the FM wire antenna
• After connecting the FM wire antenna (aerial),
AM loop antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
the area of this receiver
antenna (aerial) away from the receiver and
other equipment.
(aerial).
keep it as horizontal as possible.
23
GB