Sony HT-M77 Operating Instructions Manual page 29

Operating the USB
device
NX
./>
VOL +/–
REPEAT
1
Press USB.
You can also use INPUT SELECTOR
on the receiver.
2
Connect a USB device to the
(USB) port.
"USB" lights up on the display panel
and the playback starts automatically.
3
Press VOL +/– to adjust the
volume.
You can also use MASTER VOLUME
on the receiver.
4
Press sound field buttons to enjoy
the surround sound.
You can also use MUSIC/MOVIE,
GAME or FÚTBOL (Latin America
and Argentina models only)/
FOOTBALL (other models) on the
receiver.
For details, see page 33.
Other operations
Press
USB NX
Sound field
m/M
buttons
./>
FOLDER +/– Goes to the previous/next
REPEAT
m/M
FOLDER
SHUFFLE
+/–
Notes on the USB device
• Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the
receiver off when connecting or
removing the USB device.
• When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected. Refer to the operating
instructions supplied with the USB
device to be connected for details on the
operation method.
• Do not connect the receiver and the USB
device through a USB hub.
• It may take about 10 seconds before
"READING" appears depending on the
type of USB device connected.
• When the USB device is connected, the
receiver reads all the files on the USB
device. If there are many folders or files
on the USB device, it may take a long
time to finish reading the USB device.
• The receiver can recognize up to
– 256 folders (including "ROOT" folder).
– 256 audio files for each folder.
Operation
Starts/pauses play.
Fast reverses or forwards.
Goes to the previous/next file.
folder.
Enters repeat mode.
Enters shuffle mode.
29
GB