Tuning To Preset Stations; Presetting Radio Stations - Sony HT-DDW750 Operating Instructions Manual

Preset tuning (continued) Tuning to preset stations
Presetting radio stations
1
Press TUNER FM/AM.
The last received station is tuned in.
2
Tune in the station that you want to
preset using Direct Tuning (page 28) or
Automatic Tuning (page 29).
3 Press MEMORY.
"MEMORY" appears in the display for a
few seconds.
Do steps 4 to 5 before "MEMORY" goes
out.
4
Press PRESET TUNING + or PRESET
TUNING - repeatedly to select a preset
station number.
Each time you press the button, the preset
station nmnber changes in the
corresponding number and direction as
follows:
If "MEMORY" goes out before you select
the preset station number, start again from
slep 3.
5 Press MEMORY again to store the
station.
If "MEMORY" goes out before you can
store tbe station, start again from step 3.
6 Repeat steps 2 to 5 to preset another
station.
You can tune the preset stations by eitber of the
IMIowing two ways.
Scanning the preset stations
1
Press TUNER FM/AM.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING - repeatedly to select the
preset station you want.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order _md direction as
follows:
[--_ A 1,--+A22_021.c_B +I C*_ 12 ..... B0_-]
Using the preset codes
Use the supplied remo_e to perform 1he
lbllowing operations. For details on the buttons
used in tbis section, see pages 36-43.
1 Press TUNER on the remote.
The last received station is tuned in.
2
Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
To change a preset number to
another station
Do steps 1 to 5 to preset a new station to the
number.
Tip
In step 4, you can also use the remote to select a
preset station number. Press SHIFF repeatedly to
select a memory page (A, B or C) and then press tile
numeric buttons to select a preset nLIrnber.
30 G8