Mounting - Philips Selecon PL1 Series Installation & User Manual

PL1 LED Luminaires
Note: For more information on DMX512 networking and systems, refer to
page 1. For PL1 LED Luminaire DMX Mapping, refer to
DMX512
(from console or
control device)
PL1 LED Luminaires
DMX512 Cable Options
PL1 LED Luminaire DMX Cables (DMX to RJ45)
To Luminaire (RJ45)
To Luminaire (RJ45)

4. Mounting

There are several ways to mount PL1 LED Luminaires (depending on mounting option purchased). Below are the
various mounting options from Philips Selecon. Refer to
Note: For track mounted luminaires, refer to the track manufacturer's requirements and instructions for installation
procedures. For ceiling mounted models, you must follow local and national codes for fixture installation.
DMX512
(out from first
to second luminaire)
Sold Separately
DMX512 (XLR) Male
DMX512 (XLR) Female
"Additional Resources for DMX512" on
"DMX CONTROL" on page
See DMX512
Cable Options Below
DMX512
(out to the next luminaire or
DMX512 controlled device)
DMX512 Signal
Common (Drain)
DMX512 -
DMX512 +
Note: Remaining pins on each connector are not used.
Note: For cables required to operate and control
PL1 LED Luminaires via DMX512, see
LED Luminaire DMX512 Cables" on page
"Product Descriptions" on page 3
Installation & User's Manual
18.
DMX512 Connections
XLR Pin RJ45 Pin
1 7
2 2
3 1
"PL1
for additional information.
Mounting
4.
7