Pl1 Led Luminaire - With Ac Input Cable And Half-Coupler Mount; Pan & Tilt Adjustments - Philips Selecon PL1 Series Installation & User Manual

PL1 LED Luminaires

PL1 LED Luminaire - With AC Input Cable and Half-Coupler Mount

North American / International
Note: *Models with Half-Coupler mounting hardware includes a 39-inch (1 meter) AC input cable.
WARNING! All PL1 LED Luminaires must be mounted - vertically - as shown above to allow proper cooling.
Luminaire head may be positioned as desired.
5. Pan & Tilt Adjustments
To adjust pan and/or tilt:
Step 1. At either pan or tilt, locate Allen
head screw as illustrated in Figure
1.
Step 2. Using supplied Allen Wrench Tool
(part number ARLAKTOOL),
loosen, but do not remove,
retaining screw.
Step 3. Position / adjust pan (left or right)
and/or tilt (up or down) as desired.
Step 4. Hand-tighten, but do not over
tighten, retaining screw.
Half-Coupler Mount
PL1 LED Luminaire Shown with
Half-Coupler Mount*
Pan Retaining Screw
Tilt Retaining Screw
Allen Wrench
Tool
Figure 1: PL1 Luminaire Pan & Tilt Adjustment
Installation & User's Manual
AC Input Cable
Note:
for clarity.
Pan & Tilt Adjustments
Mount not shown
9