Table of Contents
Advertisement
Installation & User's Manual
4. Mounting Luminaire
The SL BAR 660 RGBW LED Luminaire is provided with two mounts and safety cable anchor points.
The two mounts are easily removed and reversed as required. These mounts are designed to accept a variety of
mounting hooks, clamps, etc. for hanging applications or can be set on the mounts for floor applications. Refer to
Figure 7 for additional information. Note, the bottom of the luminaire must be free and clear of any objects (i.e.,
scenery) to allow for proper airflow.
Simply attach hook, clamp, etc. to the SL BAR 660 RGBW LED Luminaire mount assembly in the M13 hole.
Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to
"Accessories" on page
Note:
Mounting hole in
mount is M13.
1 0
INSTALLATION AND SET UP
4.
Hooks / Clamps
(sold separately)
Mount
Figure 7: Mounting Luminaire - Hanging Applications
SL BAR 660 RGBW LED Luminaires
SAFETY CABLE: Is sold separately and recommended
for all hanging installation and may be required by
national and local codes. Use safety cable anchor points
for this fixture.
Sh wline
Advertisement
Table of Contents
