Disposal Of The Pump - Johnson Pump TopClean AS Instruction Manual

15.0 Disposal of the pump

For disposing the pump please observe the following instructions:
• Disconnect electrical and hydraulic connections according to technical rules and laws in
force.
• Disassemble all components of the pump for separate dismantling; wash the components
and clean the structure accurately.
The main components of the pump are made from the following materials:
• Pump casing, cover,
impeller,
shaft, impeller nut
• Elastomeres
• Motor
Components made from amianthus or lead are not used in our production.
The components of the pump should be properly disposed of, according to the corresponding
rules in force in receiver's country.
28
}
S.S. AISI 316L
NBR, EPDM, Viton, Teflon
Aluminium, Cast iron, Copper
IM-AS/02.00 GB (0412)