Operating Instructions - Unitron Passport Moxi 3G Operating Instruction

Table of Contents

Advertisement

Available languages

Available languages

can use your index finger to
open and close the battery
door if this is easier.
2. Grasp the battery with your
thumb and index finger and
remove.
3. Insert the new battery into the
battery compartment
matching it with the battery
symbol inside the battery
door. This will ensure that the battery door closes
properly.
4. Close the battery door.
Note: If the battery is inserted incorrectly, the
hearing instrument will not turn on.
Caring for batteries
• Always discard batteries in a safe and
environmentally friendly way.
• To prolong battery life, remember to turn your
hearing devices off when not in use.
• Remove the batteries and keep the battery door
open while hearing devices are not in use. This will
allow internal moisture to evaporate.
8

Operating instructions

Push button
Your hearing instrument is equipped with a push
button, which has been set for switching
between programs or adjusting your volume.
Program control
If you have an active push button program control,
each time you push the button, you will move to a new
program. Also if DuoLink is enabled, the hearing
instrument is set so that by pressing the push button
on one hearing instrument, both hearing instruments
will change programs.
Your hearing instruments beep to indicate which
program you are in (i.e. one beep for program 1, two
beeps for program 2, etc.).
Program 1 (e.g. automatic program)
Program 2 (e.g. group/party noise)
Program 3 (e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone
DuoLink (if enabled)
Your Passport hearing instruments may also come with
an optional remote control which allows you to switch
1 beep
2 beeps
3 beeps
4 beeps
short melody
opposite ear beeps the
same as side being adjusted
9

Advertisement

Table of Contents
loading

Table of Contents