Samsung SCU-9051 User Manual page 52

setup
Swing SEQ
The Swing function commands the camera to move between 2
selected locations, monitoring the route.
Pan Swing :
Activates the Pan function for the Swing operation.
Tilt Swing :
Activates the Tilt function for the Swing operation.
P&T Swing :
Activates both the Pan and Tilt functions for the Swing operation.
Swing Setting/Execute/Clear
Each of the Swing menus have sub menus with the settings.
Pan Swing
Setting
Execute
Clear
Pan Swing
[001 ] [***]
Speed =54 (1~64)
Dwell Time =003s(3~128)
Select 2 preset locations by using the joystick.
Speed indicates the camera's movement speed. DWELL TIME indicates the camera's duration of stay at a
preset location.
- Execute: Executes the Swing operation.
- Clear: Deletes data in the Swing memory.
M

While in Sequence mode operation, the actual movement can be slower than the specifi ed when moving the camera in the
direction of Pan and Tilt at the same time.
setup
52_
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
PTZ Trace
Auto Run
Power On Resume
MD Dwell Time
Swing SEQ
Pan Swing
Tilt Swing
P&T Swing
ON
OFF