Samsung SCU-9051 User Manual page 25

To install the light projector
1. Fix 4 hex screws to secure the camera on the bracket through the
holes prepared, from the bottom side of the bracket.
2. To secure the light projector on the bracket, fi x 4 hex screws through
the holes prepared on the boundary of the bracket, from the bottom
side. Fix the center hex screw from the upper side of the bracket
mount towards the light projector.
* Mounting and securing the light projector may vary depending on
the light projector type.
3. Connect the cables.
4. Insert the projector cables through the rear hole of the camera.
5. Light projector cable is to be connected to the power module.
English - 25