Samsung SCU-9051 User Manual page 48

setup
PTZF Setting (SCU-VAC/VAC1)
1. If you open the PTZF setup menu, you will see the following
window. You can use the joystick to select a desired number.
2. Select a preset number and press ENTER. You will move
to the setup screen.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset Settings, the Zoom and Focus command is
controllable only by the Zoom command.
For switching modes, refer to the menu bar in the bottom.
Edit
With this feature, you can edit or save the video-related
settings for each preset of the camera.
- Focus Mode : Refer to the section entitled Setting Up Your Camera.
- Brightness : Refer to the section entitled Setting Up Your Camera.
- Iris : Refer to the section entitled Setting Up Your Camera.
- Back Light : Refer to the section entitled Setting Up Your Camera.
- Day & Night : Refer to the section entitled Setting Up Your Camera.
- SSNR : Refer to the section entitled Setting Up Your Camera.
- After Action : Enables setting up an automatic action after the
camera arrives at a selected preset location.
MD : Commands the camera to perform the Motion Detection function.
If Focus mode is set to Auto, the MD function may not work
properly in a challenging environment.
OFF : Select this when no action is desired.
- Others : You can set AGC, Stabilizer, SSDR, Shutter, Sens-Up
and White Balance functions. For terms related to settings,
refer to the camera settings commands.
setup
48_
PTZF Setting
Preset = 001 (1~255)
EDIT PRESET 001
P 0
T 0
Z 0
F
MODE : ENT/ESC, FUNC. : W/T KEY
EXIT PTZ PTF SAVE
Preset
PTZF Setting
Edit 001
Home Position OFF
Execute
Clear
Status
Preset Edit
PTZ 000/000/01X
Focus Mode ONE SHOT
Brightness 050
Iris AUTO
Back Light OFF
Day & Night AUTO
SSNR MEDIUM
After Action OFF
Others
[001]