Food Processor - Russell Hobbs RHFP62 Instructions Manual

Tips when using the Blender

The blender is very well suited for chopping small amounts of food such as nuts,
breadcrumbs or herbs.

Cut or break up foods to be processed into cubes of about 2 to 3 cm before
operating.

Always remove the seeds of fruit and bones from meat, since these can damage
the blade unit.

Crushing ice: always add a little water to the jug before crushing ice.

When processing dry mixtures it may be necessary to switch off the appliance
occasionally, to open the blender cover and scrape the mixture from the wall of
the jug with the spatula.

When mixing liquid and solid ingredients, first mix the liquid items and then add
the dry ingredients.

Allow hot liquids to cool before processing in the jug.

If hot ingredients must be processed, the blender jug must be aerated by
removing the blender cover.

Food Processor

The processing bowl is used to prepare a wide range of whisking cream, egg whites,
cutting, chopping, blending, shredding fruit, vegetables and meat.
Preparing the Food Processor

Always place the processing bowl (B) on the motor casing. Place processing
bowl on the motor casing and turn anti-clockwise to the stop (from arrow
arrow ).

After inserting the processing bowl on motor casing, place the spindle (E) inside
the processing bowl.

Place the cover (C) on the processing bowl (arrow
clockwise to the stop.

Insert the pusher (D) in the feeding tube.
The Food Processor can only be switched on once the processing bowl and cover are
fitted correctly.
to arrow
7
to
) and turn anti-