Russell Hobbs RHFP62 Instructions Manual page 11

Processor bowl and blender jug
The processing bowl, blender jug and blade can be cleaned easily and properly with the
aid of the pulse position.

Fill the processing bowl and blender jug half full with luke warm (not hot) water
and add a few drops of detergents.

Turn the control knob to position "P" briefly.

Then rinse the processing bowl and blender jug under running water.
Caution: The blades are very sharp! Danger of injury!
The blender jug's blade unit

Release blade unit (a) from blender jug by turning anti-clockwise and remove it
while holding the jug slightly at an angle.

Remove the sealing ring (b) from the blade unit.
Rinse the components carefully by hand (danger of injury!) Only use water and non-
abrasive detergents for cleaning.
Do not clean the blade unit in a dishwasher.

When inserting the blade unit into the blender jug, please ensure the blade unit is
tightened by turning it clockwise.
Shredding, slicing and chopping blades

Clean inserts with a brush or cloth under running water or in a dishwasher!
Caution: The blades are very sharp, be careful when removing.
Motor casing
Ensure that no liquid enters the motor casing!

Clean the motor casing with a moist cloth. Never immerse the unit in water or
hold it under running water!
11