Gateway 3350 User Manual page 150

4
Hold the replacement module at a 30-degree angle and slide it into the
empty memory slot.
5
Gently push the module down until it clicks in place.
6
Rotate the keyboard toward the LCD panel until the keyboard is almost
face-up, then insert the front of the keyboard under the palm rest.
7
Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place.
8
Replace the four keyboard screws.
9
Lay the bezel back in place so it overhangs the left side of your notebook
about 1/8 inch (3.3 mm).
Installing Memory and Replacing the Keyboard
143