Honda CRV 2007 Owner's Manual page 66

06/09/13 18:22:58 32SWA600_066
To remove slack, it may help to
put weight on the child restraint
system, or push on the back of the
restraint system while pulling up
on the belt.
7. Secure the belt in the slit by
pushing up the tab. Make sure the
belt is not twisted and it is
positioned properly in the slit.
Installing a Child Restraint System
8. Push and pull the child restraint
system forward and from side-to-
side to verify that it is secure
enough to stay upright during
normal driving manoeuvres. If the
child restraint system is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
Driver and Passenger Safety
CONTINUED
61