Honda CRV 2007 Owner's Manual page 440

06/09/13 17:59:35 32SWA600_440
5. Insert the new bulb into the
headlight assembly. Make sure it
is on all the way.
6. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock in place.
7. Turn on the lights to make sure
the new bulb is working.
8. On the left side of petrol engine
model
Reinstall the coolant reserve tank.
On the right side of diesel engine
model
Reinstall the power steering
reservoir tank.
Replacing Rear Bulbs
COVER
1. Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tip
screwdriver.
Lights
SCREWS
2. Use a Phillips-head screwdriver to
remove the tail-light assembly
mounting screw under each cover.
3. Pull the tail-light assembly out of
the rear pillar.
CONTINUED
Maintenance
435