Honda CRV 2007 Owner's Manual page 378

06/09/13 17:50:35 32SWA600_378
CMBS Indicator
CMBS INDICATOR
This indicator comes on for several
seconds when you turn the ignition
switch to the ON (II) position. It also
comes on and stays on when you
turn the CMBS off by pressing the
CMBS OFF switch.
To turn the CMBS back on, make
sure the vehicle is stopped and the
ignition switch is in the ON (II)
position, then press the CMBS OFF
switch until you hear a beep.
Collision Mitigation Brake System (CMBS)
The CMBS indicator normally comes
on under these conditions:
When you manually turn off the
system. This condition will be kept
until you turn on the CMBS by
pressing the switch.
When the system shuts off
automatically.
When you drive in bad weather
(rain, snow, fog, etc.).
If anything covers the front grille
(dirt, mud, dry leaves, wet snow,
etc.).
When the VSA system indicator
comes on (see page 378 ).
When you turn the ignition switch
to the ON (II) position, the CMBS
indicator should come on for a few
seconds, then go off. If the
indicator comes on at any other
time and the symbol '' '' or
this symbol with a ''CHECK
SYSTEM'' message appears on the
multi-information display, there is
a problem with the CMBS. You
can still drive your vehicle, but
CMBS will not be operating. Have
your vehicle checked by a dealer.
Driving
373