Honda CRV 2007 Owner's Manual page 120

06/09/13 17:08:51 32SWA600_120
Rear Seat Belt Use Monitor
When you turn the ignition switch to
the ON (II) position, the middle
segment of the multi-information
display shows the rear seat belt use.
This monitor goes off after about 30
seconds. It will also go off when you
change the display by pressing the
INFO button ( ) on the steering
wheel.
The seat belt system detects any
seat belt use of all three rear seat
seating positions according to the
activation of each seat belt retractor.
Multi-Information Display
Seat belts in right and centre
positions are used.
The system shows you how many
rear seat belts are being used and
reminds you and your passengers to
fasten their seat belts. According to
the rear seat belt use (1 through 3),
you will see the indicator(s)
highlighted on the right side of the
middle segment.
CONTINUED
Instruments and Controls
115