Honda CRV 2007 Owner's Manual page 453

06/09/13 18:01:26 32SWA600_453
Wiper Blades
5. Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly
in the direction pointed to by the
arrow.
Make sure the blade is completely
installed.
448
Maintenance
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm down against
the windscreen. Lower the
passenger's side first, then the
driver's side.
REAR
To replace a rear wiper blade:
1. Raise the wiper arm off the rear
window.
2. Disconnect the blade assembly
from the wiper arm by pivoting the
blade assembly upward.