06/09/13 18:01:18 32SWA600_452
BLADE
3.
Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
4.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Wiper Blades
REINFORCEMENT
TOP
BLADE
Make sure the three rubber tabs
inside the blade fit to each notch
of the reinforcement, as shown.
CONTINUED
Maintenance
447