Vehicle Stability Assist (Vsa) System - Honda CRV 2007 Owner's Manual

06/09/13 17:51:14 32SWA600_383

Vehicle Stability Assist (VSA) System

The vehicle stability assist (VSA)
system helps to stabilize the vehicle
during cornering if the vehicle turns
more or less than desired. It also
assists you in maintaining traction
while accelerating on loose or
slippery road surfaces. It does this
by regulating the engine's output and
by selectively applying the brakes.
When VSA activates, you may notice
that the engine does not respond to
the accelerator in the same way it
does at other times. There may also
be some unusual noise from the
modulator. You will also see the VSA
activation indicator blink.
The VSA system cannot enhance the
vehicle's driving stability in all
situations and does not control your
vehicle's entire braking system. It is
still your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
378
Driving
VSA Activation Indicator
When VSA activates, you will see the
VSA Activation indicator blink.
VSA System Indicator
The VSA system indicator (see page
81 ) comes on and stays on when
there is a problem with the VSA
system. The VSA activation indicator
will also come on.
If the VSA system indicator comes
on while driving, pull to the side of
the road when it is safe, and turn off
the engine. Reset the system by
restarting the engine. If the VSA
system indicator stays, or comes
back on while driving, have the VSA
system inspected by your dealer.
If the indicator does not come on
when the ignition switch is turned to
the ON (II) position, there may be a
problem with the VSA system. Have
your dealer inspect your vehicle as
soon as possible.
When the VSA system indicator
comes on, you will also see the
symbol '' '' or this symbol with a
''CHECK SYSTEM'' message on the
multi-information display.
Without VSA, your vehicle will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.