Honda CRV 2007 Owner's Manual page 441

06/09/13 17:59:43 32SWA600_441
Lights
BULBS
4. Determine which of the four bulbs
is burned out: stop/tail-light, back-
up light, turn signal, tail-light, or
rear fog light (on the driver's side
only).
436
Maintenance
5. Remove the socket for that bulb
by turning it one-quarter turn
anticlockwise.
6.
Except for tail-light bulb
Remove the bulb from the socket
by pushing it in and turning the
bulb anticlockwise until it unlocks.
Tail-light bulb
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Align the clips on the tail-light
assembly with the holes in the
body, then push the tail-light
assembly into place. Tighten the
two mounting screws securely and
reinstall the covers.