Honda CRV 2007 Owner's Manual page 277

06/09/13 17:29:45 32SWA600_277
Playing a Tape (Optional for some types)
To Play a Tape
(Optional for some types)
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Make sure the open side of the tape
is facing right, then insert the tape
most of the way into the slot. The
system will pull the tape in the rest
of the way, and begin to play it.
The tape direction indicator comes
on to show you which side of the
tape is playing. The indicates the
side you inserted upward is now
playing. If you want to play the other
side, press the preset 2 button. When
the player reaches the end of the
tape, it will automatically reverse
direction and play the other side.
272
Features
Dolby noise reduction turns on
when you insert a tape. The
indicator will come on in the
display. If the tape was not recorded
in Dolby, turn it off by pressing the
preset 4 button. Dolby remains off
until you press the preset 4 button
again.
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. ''DOLBY'' and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
To Stop Playing a Tape
To remove the tape, press the eject
button on the tape player. If you
want to turn the player off, press the
power/volume knob or turn off the
ignition switch. The tape will remain
in the drive. When you turn the
system back on, the tape player will
be in pause mode. Press the preset 2
button to resume play.
To switch to the radio or disc player
while a tape is playing, press the AM,
FM or CD/AUX button. To change
back to the tape player, press the
CD/AUX button.
You can remove the tape with the
ignition switch in any position, even
if the audio system is off.
Tape Search Functions
FF/REW To rewind the tape,
push the preset 1 button. You will
see REW in the display. To fast
forward the tape, push the preset 3
button. You will see FF displayed.
Press the preset 1, 2, or 3 button to
take the system out of rewind or fast
forward.