Evacuation Of Combustion Gas; Regulation - Glow-worm Ultracom 24cxi Installation And Servicing

9

Evacuation of combustion gas

9.1

Regulation

b
must be used.
Consult your supplier for more information about the other
possibilities and associated accessories.
44 mm/m
1
between the appliance and the termination position. All other
type (for example C13).
minimum distances indicated in the chart below to position
supplied with your appliance.
Explain these requirements to the user of the appliance.
a
If necessary, you must install a terminal
protection kit.
b
In GB the minimum acceptable siting dimensions for the
terminal from obstructions, other terminals and ventilation
openings are shown in diagram overleaf.
In IE
be those detailed in I.S.813 "Domestic Gas Installations".
The terminal must be exposed to the external air, allowing free
passage of air across it at all times.
Being a condensing boiler some pluming may occur from
selecting the position for the terminal.
Carports or similar extensions of a roof only, or a roof and one
wall, require special consideration with respect to any openings,
doors, vents or windows under the roof. Care is required
to protect the roof if made of plastic sheeting. If the carport
comprises of a roof and two or more walls, seek advice from the
local gas supply company before installing the boiler.
0020085231_02 - 05/10 - Glow-worm
2
4 3
b
Where safe and practical to do so advise the
visible insects from the terminal end.
INSTALLATION
- 17 -