Change The Monitor Volume - 3M XT-1 Installation Manual

Outbound Greeter Message Volume

Change the Monitor Volume

Inbound Listen
Outbound Talk
3M™ Wireless Communication System Model XT-1
Installation Manual
To change the vehicle alert volume:
1. Enter the configuration mode, see page 31.
2. Select a new value for
Volume
. The range is 0 (silent) to 20 (maximum).
Changing the outbound greeter message volume affects the sound volume of the
custom greeting messages and the system internal greetings ("Store Closed" and
"Please Pull Ahead").
To turn up or down the greeter message volume:
1. Enter the configuration mode, see page 31.
2. Select a new value for
Volume
. The range is 0 (silent) to 20 (maximum).
The monitor is an additional speaker that can be used to monitor drive thru
communication without a headset, typically in the kitchen. If the monitor has a
volume control built into it, you can use it to control the overall volume level of
the speaker. To be more specific about which elements you want to control,
follow the instructions in the following sections.
Changing the inbound listen volume affects how loudly the monitor plays the
inbound (customer order point) communication. You can also disable the
monitor playing inbound sounds.
To change the inbound listen monitoring settings:
1. Enter the configuration mode, see page 31.
02 Monitor Volume
2. Select
3. To enable or disable the monitor playing the inbound sounds, change
Inbound Listen: Enable
the value for
4. To change the volume level, select a new value for
Volume
. The range is 0 (silent) to 20 (maximum).
Changing the outbound talk volume affects how loudly the monitor plays the
outbound (order taker) communication. You can also disable the monitor
playing outbound talk.
Note:
To avoid feedback and echo, set the outbound talk volume as low as possible.
To change the outbound talk monitoring settings:
1. Enter the configuration mode, see page 31.
02 Monitor Volume
2. Select
3. To enable or disable the monitor playing the outbound talk, change the
Outbound Talk: Enable
value for
4. To change the volume level, select a new value for
Volume
. The range is 0 (silent) to 20 (maximum).
01 Drivethru Volume
>
01 Drivethru Volume
>
.
ON
to or
.
ON OFF
to or
May 2008 – Revision 1.3
Configuration
Vehicle Alert
Greeter Message
OFF
.
Inbound Listen:
.
Outbound Talk:
Page 35 of 62