Outbound Greeter Message Volume; Change The Monitor Volume; Inbound Listen; Outbound Talk - 3M XT-1 Operating Instructions Manual

Change the Monitor Volume

3M™ Wireless Communication System, Model XT-1: Operating Instructions
To change the vehicle alert volume:
1. Enter the configuration mode, see page 9.
2. Select a new value for
Volume

Outbound Greeter Message Volume

Changing the outbound greeter message volume affects the sound volume of the
custom greeting messages and the system internal greetings ("Store Closed" and
"Please Pull Ahead").
To turn up or down the greeter message volume:
1. Enter the configuration mode, see page 9.
2. Select a new value for
Volume
The monitor is an additional speaker that can be used to monitor drive thru
communication without a headset, typically in the kitchen. If the monitor has a
volume control built into it, you can use it to control the overall volume level of
the speaker. To be more specific about which elements you want to control,
follow the instructions in the following sections.

Inbound Listen

Changing the inbound listen volume affects how loudly the monitor plays the
inbound (customer order point) communication. You can also disable the
monitor playing inbound sounds.
To change the inbound listen monitoring settings:
1. Enter the configuration mode, see page 9.
02 Monitor Volume
2. Select
3. To enable or disable the monitor playing the inbound sounds, change
the value for
4. To change the volume level, select a new value for
Volume

Outbound Talk

Changing the outbound talk volume affects how loudly the monitor plays the
outbound (order taker) communication. You can also disable the monitor
playing outbound talk.
Note:
To avoid feedback and echo, set the outbound talk volume as low as possible.
To change the outbound talk monitoring settings:
1. Enter the configuration mode, see page 9.
02 Monitor Volume
2. Select
3. To enable or disable the monitor playing the outbound talk, change the
value for
4. To change the volume level, select a new value for
Volume
01 Drivethru Volume
. The range is 0 (silent) to 20 (maximum).
01 Drivethru Volume
. The range is 0 (silent) to 20 (maximum).
.
Inbound Listen: Enable
. The range is 0 (silent) to 20 (maximum).
.
Outbound Talk: Enable
. The range is 0 (silent) to 20 (maximum).
Configuration
Vehicle Alert
>
Greeter Message
>
ON OFF
to or .
Inbound Listen:
ON OFF
to or .
Outbound Talk:
Rev 1.0 © 3M 2007 November
Page 13 of 48