Editing System Quick Dial - Panasonic KX-NCS1101 Operating Manual

The following information appears.
A Quick Dial Mode:
Only available when an MEC/EMEC card is installed in the PBX.
•
When System appears dimmed, a maximum of 80 Quick Dial numbers can be programmed. If an
MEC/EMEC card is installed in the PBX, the drop-down list is activated. If MEC is selected from the
drop-down list, a maximum of 4000 (with KX-TDA100/KX-TDA200/KX-TDA600) or 1000 (with the KX-
TDA50) Quick Dial numbers can be programmed.
B Quick Dial Number:
Shows the location number.
C Dial Number:
Specifies the quick dialing number.
D Contact Number:
Specifies the number to be dialed when the corresponding Dial Number is entered.
E [Edit]:
Allows you to change the corresponding Dial Number and Contact Number settings.
F [Delete]:
Deletes the corresponding Quick Dial Number setting.
G (<<), (<), (>), (>>):
Changes the System Quick Dial page.
Note
Up to 50 Quick Dial Number settings can be displayed on one page.

3.2.4.1 Editing System Quick Dial

The administrator and PA users with administrative privileges may add and change the Quick Dial Number
settings.
1.
Click the [Edit] link next to the desired Quick Dial Number.
Document Version 2007/2/19
1
2 3
4
7
6
5
3.2.4 System Quick Dial
Operating Manual—Server 35