Editing Time Table Settings; Editing Break Setting - Panasonic KX-NCS1101 Operating Manual

Note
Switching time modes manually is possible only from an authorized extension, determined by the COS
of the extension.

3.2.9.1 Editing Time Table Settings

The administrator and PA users with administrative privileges may change the start and end times of the 4
different modes (day, night, lunch, and break).
1.
Click Time Setting (T) in the Time Service Mode page.
2.
Select the desired time (Hour and Minute) for each time mode.
3.
Click APPLY to store the time setting.
4.
Click OK to return to the Time Service Mode page.
5.
Click SET to store the time table.

3.2.9.2 Editing Break Setting

The administrator and PA users with administrative privileges may set and change the break time.
1.
Click Time Setting (T) in the Time Service Mode page.
2.
Click Time Setting (T) [Break Settings].
Document Version 2007/2/19
3.2.9 Time Service Mode
Operating Manual—Server 49