Radar Cable (Not Supplied); Connecting To A Radome; Connecting To An Open Array; For New Installations - Raymarine E-Series Installation Manual

28

Radar cable (not supplied)

Having ensured that the radar scanner you are using is compatible with the E-Series
Display (see "Compatibility" on page 9), the cable should be connected as follows:

Connecting to a Radome

If you are using a radome this can be powered through the display. Just run your cable
and connect it to the radome and the display.
If the existing cable is too short, please order from the following:
Part No.
E55065
E55066
E55067
E55068

Connecting to an open array

If you are using an open array, this cannot be powered through the display. You will
need to purchase a split pedestal cable:

...for new installations

Part No
E55063
E55064
Split pedestal cable
To display
Note: You should ensure that the distance (cable route) from the power supply to the
open array is kept to a minimum.
www.busse-yachtshop.de | info@busse-yachtshop.de
Cable length Weight
15m Heavy
25m Heavy
10m Light
15m Light
Description
15m Split pedestal cable
25m Split pedestal cable
To power
E-Series Installation Manual
Radome power output
2Kw or 4 Kw
2Kw or 4 Kw
2kw
2kw
To Open
Array Scanner
D7209-1