IBM N series Hardware Manual page 114

Tue Apr 12 03:17:11 GMT-7 [itsonas2/itsonas1: scsitgt.ha.state.changed:debug]: STIO HA
State : In Takeover --> Giving Back after 5060 seconds.
Tue Apr 12 03:17:11 GMT-7 [itsonas2/itsonas1: fcp.service.shutdown:info]: FCP service
shutdown
Tue Apr 12 03:17:11 GMT-7 [itsonas2/itsonas1: scsitgt.ha.state.changed:debug]: STIO HA
State : Giving Back --> Normal after 0 seconds.
Tue Apr 12 03:17:15 GMT-7 [itsonas1: cf.rsrc.transitTime:notice]: Top Giveback transit
times raid=2963, wafl=974 {giveback_sync=367, sync_clean=316, forget=254, finish=35,
vol_refs=2, mark_abort=0, wait_offline=0, wait_create=0, abort_scans=0, drain_msgs=0},
wafl_gb_sync=301, registry_giveback=35, sanown_replay=24, nfsd=14, java=7, ndmpd=6,
httpd=1, ifconfig=1
Tue Apr 12 03:17:15 GMT-7 [itsonas1: asup.msg.giveback.delayed:info]: giveback AutoSupport
delayed 5 minutes (until after the giveback process is complete).
Tue Apr 12 03:17:15 GMT-7 [itsonas1: time.daemon.targetNotResponding:error]: Time server
'0.north-america.pool.ntp.org' is not responding to time synchronization requests.
Tue Apr 12 03:17:15 GMT-7 [itsonas1: cf.fm.givebackComplete:warning]: Cluster monitor:
giveback completed
Tue Apr 12 03:17:15 GMT-7 [itsonas1: cf.fm.givebackDuration:warning]: Cluster monitor:
giveback duration time is 4 seconds
Tue Apr 12 03:17:15 GMT-7 [itsonas1: cf.fsm.stateTransit:warning]: Cluster monitor:
TAKEOVER --> UP
Tue Apr 12 03:17:16 GMT-7 [itsonas1: cf.fsm.takeoverByPartnerDisabled:notice]: Cluster
monitor: takeover of itsonas1 by itsonas2 disabled (unsynchronized log)
Tue Apr 12 03:17:16 GMT-7 [itsonas1: cf.fm.timeMasterStatus:info]: Acting as cluster time
slave
Tue Apr 12 03:17:17 GMT-7 [itsonas1: cf.fsm.takeoverOfPartnerDisabled:notice]: Cluster
monitor: takeover of itsonas2 disabled (partner booting)
Tue Apr 12 03:17:22 GMT-7 [itsonas1: cf.fsm.takeoverOfPartnerDisabled:notice]: Cluster
monitor: takeover of itsonas2 disabled (unsynchronized log)
Tue Apr 12 03:17:23 GMT-7 [itsonas1: cf.fsm.takeoverByPartnerEnabled:notice]: Cluster
monitor: takeover of itsonas1 by itsonas2 enabled
Tue Apr 12 03:17:24 GMT-7 [itsonas1: cf.fsm.takeoverOfPartnerEnabled:notice]: Cluster
monitor: takeover of itsonas2 enabled
itsonas1>
You can check the HA pair status by running the cf status command, as shown in
Example 7-14.
Example 7-14 cf status: Check for successful giveback
itsonas1> cf status
Cluster enabled, itsonas2 is up.
itsonas1>
Starting takeover by using System Manager
Data ONTAP FilerView or System Manager can be used for performing takeover or giveback
actions from a GUI. The example demonstrates how to perform these tasks by using System
Manager.
System Manager is a tool that is used for managing IBM N series that are available for at
extra cost. System Manager can be downloaded from the IBM NAS support site that is
available at this website:
http://www.ibm.com/storage/support/nas
94
IBM System Storage N series Hardware Guide