Saving A Location As A Favourite Destination - NAVTEQ iGo Primo User Manual

2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle
type):

a slow car or you are towing another vehicle.

pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.

there is a per-use charge) in the routes by default. If you disable toll roads,
Your media

default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.

unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.

only be driven by 4WD vehicles.Your
default.
3. Tap
route. The orange line now shows the new recommended route.

3.5 Saving a location as a Favourite destination

You can add any location to Favourites, the list of frequently used destinations. Planning a
route to one of the Favourite destinations is described on page 75.
1. Select a destination as described before. It can be an address, a Place, any location
on the map, a previously used destination from History, a coordinate or a location
where a photo was taken.
2. When the full screen map appears with the selected location in the middle, tap
- You might need to avoid motorways when you are driving
- Charge roads are pay roads where you can purchase a
- Your media system
system plans the best toll-free route.
- Your media system
- Your media system
- 4WD tracks are dirt roads in very poor condition. They can
to confirm the changes. Your
.
98
includes toll roads (pay roads where
includes ferries in a planned route by
excludes unpaved roads by default:
media system excludes 4WD tracks by
media system recalculates the