Buttons And Other Controls On The Screen - NAVTEQ iGo Primo User Manual


Tap
live map that shows your current position, the recommended route and the surrounding
map area. Tap the button to enlarge the map to the full screen.

Tap to stop navigation and exit the software.

2.2 Buttons and other controls on the screen

When you are using your
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, your media
confirmation as soon as you use the controls.
Type Example
Button
Button with
value
Icon
List
to start navigating on the map. The button itself is a miniature
Media unit , you can tap buttons on the touch screen.
system, saves your selections and applies the new settings without
Tap it to initiate a function,
to open a new screen, or
to set a parameter.
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Shows status information.
When you need to select
from several options, they
appear in a list.
10
Description How to use it
Tap it once.
Tap it once.
Some icons also function
as a button. Tap them
once.
Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the sliding,
the list will scroll fast or
slow, only a bit or till the
end.
Alternatively, move
between pages with the
and buttons
and tap the value that
you want.