NAVTEQ iGo Primo User Manual page 117

Tap this button to adjust the enhanced TTS features. The following
settings are available:

Verbosity level: set how short or detailed messages you want.

You can set the feature to read out traffic messages.

Whenever a route is calculated, the software can read out the
quick summary of the route.

When you cross country borders, the application can read out
the information about the country you have just entered.

All system messages can also be announced.
Maps may contain information about the speed limits of the road
segments. Your media
current limit. This information may not be available for your region
(ask your local dealer), or may not be fully correct for all roads in the
map. This setting lets you decide whether you wish to receive visible
and/or audible warnings.
Adjust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:

Audio warning: you receive a verbal warning when you exceed
the speed limit with the given percentage.

Visual warning: the current speed limit is shown on the map
when you exceed it.
If you prefer to see the speed limit sign on the map all the time
(normally it is shown only if your speed exceeds it), you can set it
here.
This feature allows you to receive a warning when approaching a
Road Safety Camera. You must ensure on your own liability that
using this feature is legal in the country where you intend to use it.
This button is not displayed when GPS position is not available or if
you are in certain countries where road safety camera warning is
prohibited. Even if the button is available, you are responsible for
checking whether it is legal to use this feature at your location.
117
system is able to warn you if you exceed the