NAVTEQ iGo Primo User Manual page 107

emission calculations are estimations only. They cannot take elevations, curves
and traffic conditions into account.

manoeuvres. With this option, you can make HEMA NAVIGATOR to take, for
example, the motorway instead of a series of smaller roads or streets.

Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types. Besides
the below mentioned conditions, dimension, weight and freight hazard restrictions
can also be taken into account when planning a route.


Manoeuvre restrictions and directional constraints are taken into account
when planning a route.

Roads are used only if access for cars is allowed.

Private roads and resident-only roads are used only if they are inevitable
to reach the destination.

Walkways are excluded from routes.


Neither manoeuvre restrictions nor directional constraints are taken into
account when planning a route.

Roads are used only if access for pedestrians is allowed.

Controlled-access roads are excluded from routes.

A private road is used only if the destination is there.

Speed limits are not used in route calculation and an average walking
speed is used when calculating the estimated time of arrival.


Manoeuvre restrictions and directional constraints (if they are applied to
bicycles in the map data) are taken into account when planning a route.

Roads are used only if access for bicycles or pedestrians is allowed.

Controlled-access roads are excluded from routes.

A private road is used only if the destination is there.

Speed limits are not used in route calculation and an average cycling
speed is used when calculating the estimated time of arrival.


All manoeuvres are available in intersections.

Directional constraints are taken into account the way that opposite
direction is allowed with a low speed.

A private road is used only if the destination is there.

Walkways are excluded from routes.
: Results in a route with fewer turns and no difficult
:
:
:
:
107