NAVTEQ iGo Primo User Manual page 118

You can control the volume of the following sound types:
Button
This feature allows you to receive a warning when approaching a
Road Safety Camera or other alert points like school zones or railroad
crossings. You must ensure on your own liability that using this
feature is legal in the country where you intend to use it.
You can set the different alert point categories individually. The
following alert types are available:

Audio warning: beeps or the name of the alert type can be
played while you are approaching the camera, or extra alert
sounds if you exceed the speed limit while approaching one of
these cameras.

Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras. The distance from the
camera is also displayed.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be different if you are
below or above the given speed limit.

Only when speeding: The audio alert is only played when you
exceed the given speed limit.

When approaching: The audio alert is always played. In order
to draw your attention, the alert can be different if you exceed
the speed limit.
Maps may contain driver alert information. Tap this button to turn on
or off these warnings and to set the distance from the hazard to
receive the warning at. These can be set individually for the different
warning types.
This is the main volume control. These controls affect all below
sounds. They can also be accessed from the Quick menu.
These controls affect the volume of the guidance sounds (verbal
instructions).
These controls affect the volume of the alert sounds (beeps).
These controls affect the volume of the background music.
Key sounds provide audible confirmation of either pressing hardware
buttons or tapping the touch screen. These controls affect key
sounds.
118
Description