NAVTEQ iGo Primo User Manual page 25

Rotating left and
right
2D or 3D view
,
Compass in 2D
map view mode
Compass in 3D
map view mode
Location
information
Return to normal
navigation
Additional options
Changes the horizontal view angle of the map.
Tap the button once to modify the view in large
,
steps, or tap and hold the button to modify it
continuously and smoothly.
Tap this button to switch between the 3D
perspective and 2D top-down map view
modes.
The direction of the compass shows North.
Tap the button to switch to North-up view, and
,
then tap again to rotate the map in the
previous direction.
The direction of the compass shows North.
Tap the button to switch to North-up view, and
,
then tap again to rotate the map in the
previous direction.
Tap this button to open a new screen with
information about the selected map point, the
Cursor.
Tap this button to move the map back to follow
the current GPS position. Automatic map
rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
Tap this button to open a list of additional
features like saving the Cursor as a Favourite
destination, or searching for Places around the
Cursor.
25