Green Routing - NAVTEQ iGo Primo User Manual



Manoeuvre restrictions and directional constraints are taken into account
when planning a route.

Roads are used only if access for buses is allowed.

Private roads, resident-only roads and walkways are excluded from
routes.


Manoeuvre restrictions and directional constraints are taken into account
when planning a route.

Roads are used only if access for taxis is allowed.

Private roads, resident-only roads and walkways are excluded from
routes.

Road types used or avoided in route calculation:






Whenever data exist, route calculation takes into account statistical traffic data for the given
day of week and time of day (page 1).
Your software automatically recalculates the route if you deviate from the proposed itinerary.
For further information about Route settings, see page 119.

5.1.4 Green routing

Route calculation is not only about finding the quickest or shortest route. For some of the
vehicle types, you can also check the fuel consumption and CO
route, and you can create cost effective routes with less effect on the environment.
In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel
consumption values and the price of the fuel. You can also select whether you want to see
the difference between your route and the green route even if the selected routing method is
not Green.
After the above parameters are set, select
get a fast but also fuel efficient route. Note that travel cost and CO
estimations only. They cannot take elevations, turns, curves and traffic conditions into
:
:
108
emission when planning a
2
as route planning method to
emission calculations are
2