NAVTEQ iGo Primo User Manual page 120

Button
You might need to avoid motorways when you are driving a slow car or
you are towing another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette
to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
Your
use charge) in the routes by default. If you disable toll roads, Your
media
Your
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on
ferries.
Your
can be in a bad condition and usually you cannot reach the speed limit
on them.
4WD tracks are dirt roads in very poor condition. They can only be
driven by 4WD vehicles.Your
default.
Vehicle profiles:
When you first tap
the following options:
Button
You can edit the parameters of the vehicle profile.
Tap this button to reveal the below options.
Tap this button to create your own vehicle profile.
Tap this button to reset all vehicle profiles to their default settings.
When creating a new vehicle profile, first you need to select the vehicle type. Then you need
to set the following parameters. You can modify the same parameters when you edit an
existing profile:
Button
media system includes toll roads (pay roads where there is a per-
system plans the best toll-free route.
media system includes ferries in a planned route by default.
media system excludes unpaved roads by default: unpaved roads
, you see the list of default vehicle profiles. You have
120
Description
media system excludes 4WD tracks by
Description
Description