NAVTEQ iGo Primo User Manual page 82

1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Open the
4. You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5. (optional) If necessary, tap
coordinate in UTM format.
6. When finished, tap
7. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
.
menu and tap
then
.
82
to return to the Navigation menu.
.
and enter the
) appears at the