Digital Watchdog DW-VF4 User Manual page 28

27 | Chapter 1 : DVR User's Manual
RED COLOR
YELLOW COLOR
GREEN COLOR
ORANGE COLOR
SKY BLUE COLOR
DARK ORANGE COLOR
PINK COLOR
PURPLE COLOR
Caution
Dark Blue Color
A Dark Blue Color in the Search Bar during playback mode indicates data recorded during DST (Daylight Savings
Time).
The DVR does not record, even though user sets a MODE of recording in [RECORD SETUP] tab.
Panic Recording
Continuous Recording
The DVR records all the time for the set camera(s).
Motion Detection Recording
The DVR only records when it detects motion.
Users can also set motion record configuration in the [MOTION ALARM] tab.
If user sets the [MOTION ALARM] tab to [OFF] and sets the [SCHEDULE] tab to [MOTION], the
system will record when motion is detected but not activated.
Sensor Activated Recording
The system records when a sensor is triggered only during the dwell time as set in [SENSOR] of
the [DEVICE] menu.
If user sets [SENSOR] tab to [OFF] and sets [SCHEDULE] tab to [SENSOR], the system will not
record even though a sensor is triggered.
C + M (Continuous + Motion Detection) Recording
The DVR records continuously but will switch to the motion configuration specified in the [MOTION
ALARM] tab of the [DEVICE] menu, if motion is detected within the motion area. The system will
also send a Motion Event Message to the Advanced Client Software over the network.
If user sets [MOTION ALARM] tab to [OFF] and sets [C + M] in the [SCHEDULE] tab, the system
will always record as Continuous Recording even though the DVR detects a motion within the
motion area.
C + S (Continuous + Sensor Activated) Recording
The DVR records continuously but will switch to the sensor configuration defined in the [SENSOR]
tab of the [DEVICE] menu, if a sensor is triggered during dwell time. The system will also send a
Sensor Event Message to the Advanced Client Software over the network.
If user sets [SENSOR] tab to [OFF] and sets [C + S] in the [SCHEDULE] tab, the system will record
as Continuous Recording even though a sensor is triggered.
M + S (Motion Detection + Sensor Activated) Recording
The DVR records when motion is detected or when a sensor is triggered according to the [DEVICE]
menu settings.
If user sets the [MOTION] and [SENSOR] tab of the [DEVICE] menu to [OFF], the DVR will neither
record nor notify the Advanced Client Software or Central Management System.
C + M + S (Continuous + Motion Detection + Sensor Activated) Recording
The system records continuously but will switch to the motion configuration when motion is
detected or the sensor configuration when a sensor is triggered.