Transmission Gear Oil - KYMCO ZX 50 User Manual

Kymco zx 50 motorcycle user‘s manual
Table of Contents

Advertisement

(6) TRANSMISSION GEAR OIL

Check the transmission gear oil tank for leakage.
1. Place the motorcycle on its main stand on level
ground. After the engine stops for 2~3 minutes,
remove the gear oil check bolt to check the oil
level.
2. If the oil level is lower than the check bolt hole
lower edge, add gear oil to the lower edge.
3. After refilling, securely tighten the check bolt.
Recommended Gear Oil: SAE90#
Gear Oil Filler Oil (Check Bolt Hole)
Drain Bolt
Oil Level
CAUTION:
Add gear oil through the oil check bolt hole.
After refilling, use a rag to wipe clean.
Excess or insufficient gear oil will affect the
engine performance.
Never use gear oil of different brand or inferior
quality which may result in engine breakdown.
Change gear oil at first 300km and then change at
every 5000km. Add specified gear oil whenever it
is necessary.
- 32 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents