Camera
Cameras will be enabled by
checking the boxes.
Different resolutions and
recording frame rates can be
set up for different cameras.
Video Signal Type:
Select either NTSC or PAL.
Auto Channel Scan:
It automatically identifies all the
active video channels. Make
sure to always click and scan
after S/W version change.
Default:
It sets "Event Recording
Frame" and "Recording Frame"
as default values.
[Camera]
Double-click on "Camera" for
more individual Camera setup.
Select recording picture quality.
Using Still Image:
It is a function that captures
still image when Recording
schedule mode is set as E or H.
(Caution) Under R mode at
Recording schedule, this
function stop recording the
channel.
Pre-alarm (max. 10 sec.): Length of time to be recorded before event
Post-alarm (max. 60 sec.): Length of time to be recorded after event
40
[ EyeMax ]
[Motion Detection]
Select a function between Motion
detection, Object detection and
People Count.
Motion detection is a function that
DVR software detects every
movements or motions by comparing
a frame with the previous frame.
Zone Settings:
1. Drag mouse on desired place to set motion detection zones.
2. To clear the zones set, click on "Clear all" or drag mouse after click on "clear".
41
User's Manual ( 5.1.0.0 )