Eyemax DVS-9030 Manual page 23

[Object Detection]
It is a function that marks all the changes occurred from the original scene.
Eyemax will detect new & missing objects after a certain period of time (detecting interval).
Detecting Interval: An interval that DVR tries repeatedly to detect any object change in the zone
set. For example, if the object is appeared and remained only 5 seconds, it will not be detected in
case 1 min. detecting interval is set as above.
Viewing Original Frame: Checking an original image set.
Set as Original Frame: Save an original image to be surveilled to check missing or appeared object.
Set: To mark a zone.
Setting All: Select all zone in a selected channel
Clear All: To clear set zone.
44
[ EyeMax ]
Click the right mouse and select
Object Detection Blocks
Detection Blocks to remove all the blocks.
How to Set up:
1. Drag mouse to set object detection zone ( same as Motion detection).
2. Click the Set Frame button to set original image.
3. Go to the Detecting Interval and determine when to mark new object after its pause.
4. Go to Setup/Schedule and select M for the corresponding camera.
5. Go to Control Screen and find the red-squared Object Detection symbol.
6. One click on the View Original Frame will display original image set.
7. Click it again to reactivate the Set Frame button.
Clear Object
45
User's Manual ( 5.1.0.0 )