Recording Location, Static Ip Address, And Host Name - Simplex Ethernet Clock Installation Manual

Recording Location, Static IP Address, and Host Name

In order to make the management of your Simplex Ethernet Clock
system as easy as possible, Simplex recommends that you record the
Clock ID, Location, IP Address, and Host Name for each unit in the
system as it is installed.
The Host Name will be visible in most DHCP servers. It should
describe the location so that the IP Address of a particular clock will
be easy to locate by matching up the Host Name. For example:
3rdFlrConfRm
Please see page 53 in the Simplex Ethernet Clock Owner's Manual for
the procedure that can be used to change the Host Name of the
Simplex Ethernet Clock.
CLOCK LOCATION IP ADDRESS Host Name
ID#
©2007 Simplex Time Recorder Co. All rights reserved.
Page 5