Simplex Ethernet Clock Installation Manual page 22

reboot
Shuts down and cleanly reboots the system. Note that
this takes tens of seconds to complete
sntp [options]: Used to configure and display the
sntp
SNTP Time Server settings.
•
•
•
•
•
•
stats Displays current system status
timezone [offset]: Used to configure and display
timezone
the Clock's TimeZone settings.
offset - The timezone offset from UTC to apply in
hours:minutes.
optional, and defaults to 0.
The valid offset range is: -12:59 to 12:59
Examples: United States: East: -5, Central: -6,
Mountain: -7, Pacific: -8
©2007 Simplex Time Recorder Co. All rights reserved.
[-h host] Set the SNTP Time Server hostname
or ip address to synch with.
Default host is: time.nist.gov
[-p port] Set the SNTP Time Server port to
use. Default: 123
[-i interval] Set the time synch interval
in seconds.
Default: 7200 secs
[-t timeout] Set the synch response timeout
in microseconds.
Default: 10000 ms
[-s] Trigger an immediate SNTP Time
Synchronization attempt.
The minutes specification is
Range: 60 to 604800
Range: 1000 to 120000
Page 19