Simplex Ethernet Clock Installation Manual page 20

dst [options]: Used to configure and display the
dst
Clock's Daylight Saving Time settings.
While in Daylight Saving Time, one hour is added
to the time display.
•
•
•
•
Note: In firmware Versions 1.0 and 1.1, disregard
the
both contain errors.
calculator at
determine the correct eight (8) digit
configuration rule for your location.
help Displays help information
ipconfig
ipconfig [options]:
display the network settings.
•
•
•
•
•
•
•
•
©2007 Simplex Time Recorder Co. All rights reserved.
Disable the Daylight Saving Time
adjustment. [dst -none]
Enable Daylight Saving Time for the United
States or Canada using March, 2007 rules.
[raw -1 8 2 2 1 1 10 2]
Enable Daylight Saving Time for the
European Union or United Kingdom. [dst -eu]
For other locations use the online DST
calculator at www.buyinova.com/calculator
to compute the correct eight (8) digit DST
configuration rule. [dst –raw]
-us DST macro and the –raw telnet help;
Use the online DST
www.buyinova.com/calculator
Used to configure
[-d] Use DHCP to lease an IP address and
retrieve network settings.
[-a IP] Use the specified fixed IP address.
(Disables DHCP)
[-m mask] Set the subnet mask.
(Ignored if DHCP is enabled)
[-g gateway] Set the gateway
address.(Ignored if DHCP is enabled)
[-n domainname] Set domain name.
(Ignored if DHCP is enabled)
[-p IP]Set primary DNS address.
(Ignored if DHCP is enabled)
[-s IP]Set secondary DNS address.
(Ignored if DHCP is enabled)
[-t dnstimeout]Set DNS timeout (0 is
valid). (Ignored if DHCP is enabled)
to
Configure or
Page 17