Symbols In The Operator's Manual - Husqvarna AUTOMOWER Operator's Manual

1. INTRODUCTION AND SAFETY

1.3 Symbols in the Operator's Manual

These symbols can be found in the Operator's Manual.
Study them carefully so you understand their
significance.
• Inspection and/or maintenance must be carried
out with the main switch set to OFF.
• Always wear protective gloves when working
with the mower's underframe.
• Never use a high-pressure washer or even
running water to clean Automower.
• A warning box indicates a risk of personal injury
exist, especially when the stated instructions are
not followed.
• An information box indicates a risk of material
damage exist, especially when the stated
instructions are not followed. The box is also
used where there is a risk of user error.
OFF OFF
WARNING
Xxxxxx xxxxx xxxx xxxx xxxxx xxx.
IMPORTANT INFORMATION
Xxxxxx xxxxx xxxx xxxx xxxxx xxx.
3012-288
3012-272
3012-271
English - 7