VARI❋LITE® - VL500™ L
Tilt Motor Assembly Replacement
Parts:
21.9685.0540
Tools:
•
#2 Phillips Screwdriver
•
Diagonal Cutters
WARNING:
To remove and replace tilt motor assembly:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove display side yoke cover by removing four 6-32x3/8" LG PTB screws.
Step 3. Remove Display PCB and Main Control PCB by following procedures
Step 4. Remove 4 x 6-32 x 3/8" PFB screws (two each side of yoke) that hold Top Cover
Step 5. Disconnect wiring from motor and encoder PCB.
Step 6. Cut wire tie connecting wiring to yoke arm.
58
S
M
UMINAIRE
ERVICE
1 EA
ASSY, PAN/TILT MOTOR
Remove power from luminaire before performing maintenance.
and
Replacement" on page 49
.
50
Louver Plate and remove plate.
21-May-2009
ANUAL
"Main Control PCB/Fan Assembly Replacement" on page
"Display PCB
02 .9 685 .00 10 A