Philips VL500 Wash Luminaires Service Manual page 44

VARI❋LITE® - VL500™ L
Lamp Replacement - Incandescent (continued)
WARNING:
glass with bare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If
required, use alcohol and soft, lint-free cloth to thoroughly clean glass portion of lamp.
Step 5. Remove lamp by pulling straight out of socket.
Step 6. Carefully clean reflector with soft, lint-free cloth to remove dust and other debris.
Step 7. Install lamp by pressing firmly into socket. Ensure lamp is fully seated in socket
Step 8. Close and re-latch back of luminaire.
Step 9. Disengage service tilt lock to allow luminaire head to move freely.
Note:
For an updated list of approved lamps for all versions of the VL500™ luminaire,
please refer to Vari-Lite Technical Notice TN-248 (current version) on the Vari-Lite web site at
www.vari-lite.com.
26
S M
UMINAIRE ERVICE
Wear cotton gloves or other covering while servicing lamp. Touching lamp
with base of lamp against socket base.
21-May-2009
ANUAL
02 .9 685 .00 10 A