Mini-Xlr (Display/Remote Programming) Connector Replacement - Philips VL500 Wash Luminaires Service Manual

VARI❋LITE® - VL500™ L
Mini-XLR (Display/Remote Programming) Con-
nector Replacement
Parts:
25.9685.0770
Tools:
• #2 Phillips Screwdriver
WARNING:
To remove and replace Mini-XLR connector:
Step 1. Remove power from luminaire.
Step 2. Position light to access top of pan tube assembly.
Step 3. As shown in
Step 4. Remove pan tube cover. (Note, tether will still hold cover).
8-32x1/2" PFB
Screws (x6)
Pan Tube Assembly
Figure 37: Mini-XLR (Display/Remote Programming) Connector Replacement
Step 5. Disconnect wiring from Mini-XLR.
Step 6. Remove two 4-40x1/4" PFB screws at front of Mini-XLR connector.
Step 7. Replace Mini-XLR by performing Steps 3 through 6 in reverse.
70
S M
UMINAIRE ERVICE ANUAL
1 EA CONNECTOR, MINI-XLR (DISPLAY / REMOTE
PROGRAMMING)
Remove power from luminaire before performing maintenance.
Figure 37
, at pan tube cover, remove six 8-32x1/2" PFB screws.
Mini-XLR
4-40x1/4" PFB
Connector
Screws (x2)
21-May-2009
Do not remove this screw
Pan Tube Cover NOTE:
Some components not
shown for clarity. This
procedure is applicable
for all models.
Cover Tether
VL500 80V
Pan Tube Assembly
02 .9 685 .00 10 A